16Jul 2018

Micon Mould is situated in Huangyan, which is famously known as”the Town of China Mould”. It’s a short commute from Huangyan to Ningbo, Wenzhou, Hangzhou or Shanghai. It is a district affiliated to Taizhou City, Zhejiang Province. Micon Mould has many years of experience on the research, design, manufacture and sale of plastic mould. with […]

16Jul 2018

Before mould is transferred out of shiny, we use this document to validate the mould quality at our location. Normally, customer and mould maker attend the validation procedure together and sign off after checking. Now we list some checking items for your reference only. 1. Compatibility with injection machine to be used. (1) Is size […]

16Jul 2018

In order to ensure that mould works well in long production life as planned, it is important to make a maintenance plan for the mould. To avoid that any foreign matters may fall into gaps of the ejection assembly during tryout or production and machine stops so caused, it is necessary to place a protection […]

16Jul 2018

Typically the mould rusting is caused by the gas produced by the melt overheating decomposition. If happened in molding, that is because the corrosion gas existing around rusts the mould. For this reason, we must use a dry and soft cloth to clean the mould when injection molding stops. If don’t need molding production, we […]

16Jul 2018

Injection moulding defects may be caused by many different factors. Listed here are common design, maintenance and production issues that can effect the quality of injection moulded products: • Compounding: melt quality, contaminants and inadequate drying. • Compatibility of polymer additives such as pigments and stabilizers. • Suitability of the polymer grade for the application […]

16Jul 2018

A small amount of melt solidifies at the gate point before the start of injection and is pushed into the mould cavity via the melt stream. Evidence of a cold slug normally occurs close to the injection point. Solution: 1. Increase the temperature of the nozzle slightly. 2. Reduce the back pressure. 3. Increase the […]