China mould maker

30Nov 2018

The wall thickness of the plastic folding turnover box is relevant to the processing precision of the mold. The folding crate box is too thin, which may cause a decrease in compressive strength and impact strength. Under the quality assurance, we can consider the improvement of transportation space utilization, improve the transportation and storage quality, […]

10Aug 2018

Plastic mould manufacturing is a step from design, processing, assembly, adjustment, correction and finally can be put into practical use. What will influence the mould life? 1. Mould steel The most important factor is the mould steel quality, the right mould steel is the top priority. For example, For example, different injection molding materials, the […]

10Aug 2018

Packaging is a general term for containers, materials and auxiliary materials used according to certain technical methods. The purpose is to protect products, facilitate storage and transportation, and promote sales. In a sense, packaging has a significant impact on the rationalization of logistics. In the past, people used to think of plastic crates as part […]

25Jul 2018

The cap mould should be preheated before test. There are two methods for preheating the mould. The first is to use the cooling water in the mold itself. There are mold warmers at home and aboard that widely used, which is a good method for mould heating. The second is the external heating method. The […]

25Jul 2018

Short shot refers to a phenomenon that the plastic injection mould cavity can not be completely filled. Any factors that prevent the polymer melt flow or insufficient injection weight could lead to a short shot phenomenon. These factors include: 1. Melt temperature, mold temperature or injection pressure and speed is too low 2. Uneven plasticizing […]

17Jul 2018

Gas-assisted and water-assisted injection molding based on similar technology, and therefore its scope is similar. So, what is the difference between the two techniques in? What are the applicable scopes for both technologies? Gas-assisted injection molding, as a very mature technology has been applied for many years of history in the injection molding industry. Gas-assisted […]

17Jul 2018

Crates can be widely used in Hardware, electronic, mechanical parts, refrigeration, storage, transportation etc. They are acid and alkali resistant, oil resistant. Convenient, stacked neatly, easy to manage. Plastic crates are anti-aging, bearing strength, tensile, and anti-compression, tear resistant, high temperature resistant, rich color. According to the box thickness, crate moulds can be divided into: […]

17Jul 2018

Mould heat treatment is an important way for steel to enhance the hardness performance, which is generally carried out after the mould rough machining. After heat treatment then do finishing machining. But there is a risk during the process. The improper handling will cause the steel cracks easily and scrapped, then what causes plastic mold […]

16Jul 2018

Injection mould is a kind of complex structure requires a very high precision, is currently the most widely used plastic mould. Injection mold processing equipment required for lathes, milling machines, drilling machines, grinding machines, machining centers, EDM, wire cutting , Sawing machine, internal and external grinder, laser marking machine, boring machine, etc., Today Micon Mould […]